RUNNER 3.70 LINE is a computerized numerically controlled machine for the straight and shaped cutting of up to 25 mm thick flat glass sheets .
FEATURES: In addition to the straight and shaped cutting of up to 25 mm thick flat glass sheets following features are also available
- Shape reading through optical reader (optional) enabled to scan templates taken from the customers;
- Low-e coating removal with a dedicated frontal or peripheral wheel (optional);
- Optional vinyl cutting to enable further acid or sand glass processing;
High Productivity:
- The rectified and tempered cylindrical guides with integrated gauge line,, enable higher cutting speed up to 160 m/min;
- Belt system for Glass Transport allows to process higher quantity, avoiding dead time of manual loading and unloading of glass sheets;
- Double motors with Gantry system on X axis provide the best accelerations and an enhanced movement fluency on different glass thicknesses;
- Automatic adjustment of cutting head height as per different glass thicknesses saves the set-up time;
- Easy and fast changing of cutting wheel enables reduction in tool-change time ;
- Optional four cutting heads system instead of single cutting head leads to zero set-up time .
Quality:
- Thick single-piece steel base with wide, stable and rigid structure provides long lasting highest performance;
- Automatic zero system (side pushers in X and reference stops in Y) resets all manual operation to zero and provides high precisions;
- Work table made up with rectified wood panels coated with carpet, assures the flatness for an optimal cut of glass sheets;
- Numerical Control management of machine gives the best cutting results;
- Numerically controlled “C” axis for shaped cutting;
- Possible manual adjustment of cutting oil pressure with electronic management of oil preset and close, to avoid the oil drop at the end of the cut.
Simplicity:
- Intuitive and user-friendly software suitable for both small and big glassware;
- Simplification of the work with PC operating in Windows;
- Electrical panel integrated in the base enable an easier damage solution, a more efficient air conditioning and a saving in machine space;
- Remote diagnosis and assistance allows visualization on the state of the machine from any other authorized PC.
The machine is equipped with all safety devices necessary to give the operator maximum protection during the normal running.
Installation and the training of the machining center at the customer's factory premises is carried out by one CMS engineer.
